MiTAC 8050QMA Manuel de service télécharger pdf (Page 59)

50QMA

N/B Maintenance

Reassembly

1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins

into the holes. Tighten the screw by a flat screwdriver to locking the CPU.

2. Connect the fan’s power cord to the system board, fit the heatsink upon the CPU, then secure with four spring

screws and two screws.

3. Replace the CPU cover and secure with seven screws.

4. Replace the battery pack. (Refer to section 2.3.1 Reassembly)

4. To remove the existing CPU, loosen the screw by a flat screwdriver, upraise the CPU socket to unlock the CPU.

(Figure 2-6)

Figure 2-6 Remove the CPU

MiTac Secret

Confidential Document

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 137 138

Pas de commentaire

MiTAC 8050QMA Manuel de service Page 59